T
6s RCA plug - RCA - screwable - 1 pair - VIABLUE

• T6s RCA plug - RCA - screwable - 1 pair - VIABLUE

high quality audio RCA plug with 24k real gold plating and bronze pin from ViaBlue.

These RCA connectors are very high quality high end RCA connectors with 24 karat real gold plating on the contact surfaces. The contact pins are made of bronze. The actual connector housing is made of aluminum.
This is able to take in the screw version cable up to a diameter of 8mm, as a solder version up to 9.5 mm. The scope of delivery of the T6s banana plug pairs includes two diameter decreasers each.

Structure and description
Screw versionToassemble the Ts6 RCA plugs, the stripped cable ends must be pushed into the plug inner housing. This is done by passing the conductor through the insulation into the pin cylinder and pressing the third ground, which is turned 360°, until it reaches the insulation stop.
Subsequently, tightening the pin screw as well as the screw for strain relief enables the cable to be firmly fixed in the connector inner housing. After that, the outer screws are tightened after sliding on the aluminum sleeve:
It is possible to mount cables up to a diameter of 7 - 8 mm.

Soldering version
In the soldering version, the stripped cable ends are soldered to the contact part of the connector. The contact part can be completely detached from the connector housing. The M4 threaded screw is used to provide strain relief. The enclosed decreasers, which reduce the inner diameter in the plug entry area if required, allow cable assembly with diameters of 3 - 9.5 mm² while maintaining a high strain relief capacity.

For single order please specify if left or right channel (black/red) !

Technical details
Max outer diameter - 13,5 mm
Contact - for 6 - 9,5 mm sockets
Finishing - 24 carat gold plating
Total length - 45 mm
Cable receptacle - from 3 mm - 9.5 mm cross-section (depending on the variant)
screws - 1,5 mm hexagon socket
Packaging unit - 1 pair