JMW 10
Zoll - 3D Printed Uni Pivot Tonarm - Reference Verkabelung- VPI

• JMW 10 Zoll - 3D Printed Uni Pivot Tonarm - Reference Verkabelung- VPI

VPI JMW 10" 3D Printed Uni-Pivot Tonearm - with Reference internal cabling
The JMW 10" 3D Printed Uni-Pivot tonearm from VPI Industries represents one of the most advanced developments in the field of analog tonearms. It combines state-of-the-art manufacturing technology with audiophile fidelity and has been specially developed for discerning listeners and high-end enthusiasts. Thanks to the combination of a 3D-printed tonearm tube and the high-quality VPI Reference internal cabling, this tonearm guarantees outstanding signal conduction with minimal resonance.

Product features in detail:

3D-printed monocoque design
The tonearm tube is manufactured in a single piece from high-strength polymer using an industrial 3D printing process. This design eliminates gluing points or material transitions and drastically reduces resonances - for an extremely neutral, detailed sound image.

Uni-Pivot bearing technology
The classic VPI Uni-Pivot technology ensures maximum freedom of movement with stable guidance. The arm "floats" almost without resistance and follows the groove with maximum precision - ideal for the finest dynamic gradations and authentic spatial imaging.

10-inch arm length
At 10 inches, the arm offers an ideal compromise between tracking angle and handling. It ensures particularly even tracking with less distortion - especially in the inner area of the record.

VPI Reference internal cabling
The integrated **Reference cabling** guarantees high-purity signal transmission from the pickup to the output. This particularly low-loss cable routing contributes significantly to sonic transparency and dynamics.

Integrated VTA height adjustment
Fine adjustment of the tonearm height (Vertical Tracking Angle) directly during operation. Perfect for anyone who wants to optimally adjust their cartridges to different record thicknesses or sound preferences.

Anti-skating system (optional)
As with all VPI tonearms, a mechanically guided anti-skating device has been deliberately omitted - the focus is on maximum sound purity. An optional anti-skating solution is available.

Compatible with VPI and third-party turntables
The tonearm is prepared for VPI turntables as standard, but can also be installed on third-party turntables - optionally with a suitable base.

Technical data:

• Bearing type: Uni Pivot
• Internal wire: Nordost reference wire
• Pivot to spindle: 258mm
• Effective length: 273.4mm
• Effective mass: 10.7g
• Overhang: 15.4mm
• Offset angle: 19.98 degrees
• Average RMS distortion: 0.311%
• Material: 3D technology Consisting of, but not limited to, epoxy resin and Delrin materials, steel, copper and aluminum