High End miniature fuse III - NEW - 5x20mm - polished pure copper
- 1.6 Amp - ahp

Why does a fuse affect the sound of my HiFi system at all?

The fuse is the first bottleneck in the power path of every HiFi component. Its fuse element is intentionally thin and creates a resistive impedance that restricts current flow. Industrial standard fuses use basic metal alloys in glass housings — with no consideration for electrical losses, resonance behaviour or thermal stability. Audiophile fuses address precisely these weak points: highly conductive materials such as pure copper or silver-gold alloys reduce contact resistance, resonance-optimised ceramic housings replace sonically detrimental glass, and special filler materials stabilise the fuse element both mechanically and thermally. The result: cleaner current delivery, measurably lower contact resistance, and an improved damping factor in amplifiers — translating into tighter bass, finer resolution and greater spatial presentation.

Which fuse format do I need — 5 × 20 mm or 6.3 × 32 mm?

This depends on the origin of your equipment. The vast majority of European and Japanese HiFi components use the 5 × 20 mm format — by far the most common type. American equipment frequently uses the larger 6.3 × 32 mm format (also known as ¼ × 1¼ inch). You can find the exact type in your component's user manual or printed on the original fuse. Both AHP and HiFi-Tuning offer their audiophile fuses in both formats.

How do I find the correct ampere rating and trip characteristic?

Always use exactly the same rating and trip characteristic as the original fuse. The ampere value is printed on the original fuse — a magnifying glass may be helpful as the markings can be very small. The trip characteristic is indicated by a letter: "T" stands for slow-blow (time-lag), "F" for fast-blow. Most HiFi equipment uses slow-blow fuses. If in doubt, contact the equipment manufacturer or distributor for the correct value. Never use a higher rating than specified — the fuse protects your equipment in case of a fault.

Copper or silver/gold — how do the conductor materials differ sonically?

Copper-based fuses — such as the AHP Feinsicherung with its pure copper element or the HiFi-Tuning Supreme³ Copper with Cardas Grade 1 copper — are typically described as warm, musically flowing and grounded. They emphasise tonal colour and full-bodied midrange. Silver-gold alloys, as used by HiFi-Tuning in the Supreme³ Silver/Gold (99 % silver, 1 % gold), tend towards a livelier, more detailed presentation with added sparkle in the treble and tighter control. The choice ultimately comes down to personal taste and the overall balance of your system — both approaches deliver a clear improvement over the factory-fitted original.

Can an audiophile fuse blow on first power-up?

In rare cases, yes — particularly with components that draw high inrush currents, such as certain amplifiers from Naim or Accuphase. Audiophile fuses are manufactured to tighter tolerances than industrial standard fuses, whose trip threshold can exceed the printed rating by up to 100 %. This means a factory-fitted 2 A fuse may in practice only trip at 4 A, whereas an audiophile fuse will trip much closer to its rated value. If in doubt, check with the equipment manufacturer before making the swap. Always disconnect the component from the mains before replacing the fuse.

Which component should I upgrade first?

Start with components closest to the source in the signal chain — phono preamplifiers, DACs and preamplifiers typically respond most noticeably to a fuse upgrade. Power amplifiers, CD transports and streamers also benefit audibly. The logical approach is to work from the source towards the power amplification: upgrade the most sensitive link in the chain first, then extend step by step across the entire system. This way you can clearly hear the improvement at each stage and maintain control over your budget.

Does the orientation of the fuse matter?

From a purely electrical standpoint, an AC fuse has no inherent directionality. However, numerous audiophiles — including experienced reviewers and dealers — report audible differences depending on fuse orientation. HiFi-Tuning and other manufacturers recommend trying both directions and choosing the one that sounds better. The effort involved is minimal: flip the fuse, listen briefly, compare. Whether you perceive the effect depends on your system's resolution and your own listening habits — trying it certainly cannot hurt.

Do audiophile fuses need a break-in period?

Opinions vary, but many users and manufacturers speak of a certain settling-in phase. AHP developer Andreas Jungblut notes that the bulk of the sonic improvement is audible immediately after installation, though the fuse may gain a touch more refinement after some time on the mains. Community reports typically mention 20 to 50 operating hours before the sound fully stabilises. So don't rush your judgement — give the fuse a few days of listening time before forming your final impression.