Loudspeaker cable BSSC
3.8 mm2, 2 x 3 m - Melodika

• Loudspeaker cable BSSC - 3.8 mm2, 2 x 3 m - Melodika

piral-Litz Technology - High End Cable from Melodika

Many individual conductors are insulated separately. In each conductor flows the total current of the amplifier. This solution is much better than standard cables, because no electrons jump from strand to strand, but they move without interruption.

The movement of electrons from strand to strand is an undesirable side effect, which leads to loss of information. The most important advantage of this technology is the equal distribution of current over the entire cross-section of the cable, which increases the efficiency of signal transmission. The skin effect is practically eliminated. Coated conductors prevent oxidation of the copper. Spiral twisted conductors cause interference noise to be extremely low, as the induced current in one conductor has an opposite direction than in the adjacent one, which causes interference to cancel each other out.

Specification

• Cable type: LS cable
• Construction: solid twisted conductors, 2 x (16 x 0.2 mm2, individually insulated) = 2 x 3.8 mm2
• Conductor material: 6 N, OFC copper, 99.9999% oxygen-free
• Conductor resistance: 6.2 Ohm / 1000 m
• Conductor capacitance: 100 pF / 1 m
• Conductor inductance: 0.5 uH / 1 m
• Insulation: triple, with transparent PVC jacket
• running direction: yes
• length: 2 x 3 m
• Connector dimensions: l 46 mm, d 11 mm