Record cleaning machine accessories
Get more out of your record cleaning machine
Record cleaning machine accessories complement the cleaning and care of records with suitable parts and practical additions. They support the cleaning process, increase convenience and are tailored to the different demands of everyday vinyl life – so cleaning routines can be supplemented, simplified or adapted to existing machines.
The extra for every record wash
The right fluid and fresh wear parts ensure a thorough cleaning result.
Practical extras make every wash quicker and more pleasant.
Parts replaced in good time keep your machine performing for the long term.
Adapters and accessories for singles, 10-inch records and special requirements.
Why the right accessories matter
A record cleaning machine is only as good as what it works with. Fluid, brushes, suction lips and filters come into direct contact with your records in every wash. Fresh, compatible accessories ensure that your machine keeps cleaning as thoroughly and gently as on the first day.
The right cleaning fluid lifts grease, dust and residues out of the groove.
Soft, intact brushes and lips protect the record surface from scratches.
Clean filters and fresh fluid stop dirt from travelling from record to record.
Adapters, label protectors and racks make washing easier and safer.
Accessories at a glance
In this category you will find parts and additions for a wide range of record cleaning machines:
| Accessory | What for | Good to know |
|---|---|---|
| Cleaning fluids & concentrates | Lift dirt, grease and residues out of the groove | Always choose to suit the machine and mix as instructed |
| Brushes & applicators | Spread the fluid and loosen dirt | Clean regularly, replace when worn |
| Suction lips & arm parts | Vacuum off the fluid together with the dirt | Wear part – determines drying quality |
| Filters & tank accessories | Keep the bath clean in ultrasonic and tank machines | Replacement interval as specified by the manufacturer |
| Adapters & label protection | Allow singles and 10-inch records, protect the label | Make sure of an exact fit to the machine |
| Racks & drying stands | Let washed records drain and dry safely | Only touch records by the edge and label |
Choosing the right cleaning fluids
The fluid is the most important consumable of any record cleaning machine. You can find out more about the different machine types in our guide to record cleaning machines. For accessories:
- —Matching the method: Ultrasonic machines have special additives tailored to the bath – fluids for brush machines are not always suitable for them.
- —Dose as instructed: Mix concentrates exactly as specified by the manufacturer – too much cleaning agent can leave residues on the record.
- —Distilled water: Always use distilled or demineralised water for mixing and rinsing, so that no limescale remains.
- —Renew regularly: Replace used or dirty fluid in good time – otherwise dirt is merely redistributed.
Wear parts & maintenance
Many parts of a record cleaning machine wear over time. A quick look before every wash is worthwhile:
If they look hardened, torn or leave wet streaks, it is time for a replacement.
Rinse after each session and let dry; replace matted or flattened bristles.
Clean or replace regularly in ultrasonic and tank machines – this keeps the bath clear.
Empty, rinse and let dry from time to time so that no deposits form.
Matching your machine
Many accessories are designed for specific machines and models. To make sure everything works smoothly:
- —Check the model: For spare parts, check the compatibility information and compare the make and model of your machine.
- —Record formats: Many machines offer suitable adapters or spindles for singles and 10-inch records.
- —Label protection: A precisely fitting label protector keeps the label dry during wet cleaning – especially important for valuable pressings.
- —If in doubt, ask: Not sure whether a part fits? Tell us your machine – we will gladly check for you.
Your benefits at Klangheimat
We clean records ourselves every day – in our own record cleaning service. This practical knowledge shapes our selection.
Accessories we know from our own experience with record cleaning machines.
Fluids, wear parts and additions for different machine types.
We help you find the right part for your machine.
Frequently asked questions about record cleaning machine accessories
Which cleaning fluid suits my record cleaning machine?
That depends on the method. Brush and vacuum machines work with different fluids than ultrasonic machines. The safest choice is the fluid the manufacturer recommends for your machine – or an alternative expressly approved for it.
Can I use ordinary tap water?
We recommend distilled or demineralised water. Tap water contains limescale and minerals that can settle in the groove as residues.
How often should I change the cleaning fluid?
That depends on the machine and on the number of records and how dirty they are. At the latest when the fluid turns cloudy or visibly contains dirt, it should be renewed. Follow the manufacturer’s instructions.
How can I tell that the suction lips need replacing?
If the record is no longer evenly dry after vacuuming, wet streaks remain or the lips look hard, cracked or deformed, it is time for a replacement.
How do I look after my machine’s brushes?
Rinse the brushes with distilled water after each cleaning session and let them air-dry. Replace matted or flattened bristles.
Can I also clean singles and 10-inch records?
With many machines, yes – using suitable adapters or spindles. Make sure the adapter fits your machine exactly.
Why do I need a label protector?
A label protector keeps the label dry during wet cleaning. This keeps paper labels intact – especially important for valuable or rare pressings.
How do I know whether a spare part fits my machine?
Check the compatibility information for the item. If in doubt, simply tell us the make and model of your machine – we will gladly check which part fits.
Discover our record cleaning machine accessories now – for clean records and a machine in top form.
Looking for a specific spare part or unsure what fits? Get in touch – we will gladly advise you.
