Loudspeaker cable BSSC
3.3 mm2, 2 x 3 m - Melodika

• Loudspeaker cable BSSC - 3.3 mm2, 2 x 3 m - Melodika

Spiral-Litz technology - high-end cables from Melodika

Many individual conductors are insulated separately. The total current of the amplifier flows in each conductor. This solution is much better than standard cables, as electrons do not jump from strand to strand, but move without interruption.

The movement of electrons from strand to strand is an undesirable side effect that leads to loss of information. The most important advantage of this technology is the equal current distribution over the entire cross-section of the cable, which increases the efficiency of signal transmission. The skin effect is practically eliminated. Coated conductors prevent oxidation of the copper. Spirally twisted conductors ensure that interference is extremely low, as the induced current in one conductor is in the opposite direction to that in the neighboring conductor, which cancels out interference.

Specification

• Cable type: LS cable
• Construction: solid twisted conductors, 2 x (16 x 0.2 mm2, individually insulated) = 2 x 3.3 mm2
• Conductor material: 6 N, OFC copper, 99.9999% oxygen-free
• Conductor resistance: 6.2 Ohm / 1000 m
• Conductor capacitance: 100 pF / 1 m
• Conductor inductance: 0.5 uH / 1 m
• Insulation: triple, with transparent PVC jacket
• Running direction: yes
• Length: 2 x 3 m
• Plug dimensions: l 46 mm, d 11 mm