Project DEBUT RecordMaster II - USB turntable
white high gloss - Pro-Ject

• Project DEBUT RecordMaster II - USB turntable - white high gloss - Pro-Ject

Highest digital resolution - for perfect recordings of your records

• Digitize records via USB output
• MM cartridge Ortofon OM 5E
• Integrated phono preamplifier (can be switched off)
• Line or phono out
• 33/45 rpm (electronic)
• 78 rpm (manual)
• Dust cover included

Words like "digital" or "digitized" are not necessarily a guarantee of good sound in the context of a turntable's function. Pro-Ject Audio believes that it makes no sense to digitally record an analog signal produced by a mechanically inferior turntable. Not even if these often valuable-looking, but mechanically dubious devices - often offered at electronics stores or even coffee roasters - advertise with well-known, sonorous brand names or important-sounding technical data. The Debut RecordMaster II, on the other hand, integrates the digitizing function into a solid mechanical base that has proven itself over many years: the Pro-Ject Debut, which has won numerous awards from domestic and international trade magazines.

Since the Debut RecordMaster II has an integrated phono preamplifier, you can operate it on amplifiers without a dedicated turntable connection (phono input) directly to a high level input (e.g. AUX) or alternatively connect it to your phono preamplifier (MM) or the MM phono input of your amplifier.

The electronic speed switching between 33 and 45 rpm is very convenient if you often switch between LP and single speed, as there is no need to shift the belt on the drive pulley. Thanks to the manual switch to 78 rpm and with an optionally available needle insert Ortofon Stylus OM 78 you can even play your shellac records.

Via the USB output you can digitize vinyl records to the hard disk of your computer or laptop (recording program not included).

Drive

• Surface of the chassis in high gloss black, white and red. Veneered and silk-matt lacquered in walnut
• Electronic speed selection between 33 and 45 rpm, manual setting option of 78 rpm
• Integrated A/D converter with USB output
• Switching line-out / phono MM-out
• Chassis made of compressed wood fibers, with four shock-absorbing feet
• The platter is a sandwich construction of the sub-platter, a steel plate platter and a felt mat
• The platter bearing consists of a sintered bronze bushing, in which a stainless steel axle with high fitting accuracy runs on a Teflon bearing base
• Integrated motor control (sine wave generator)
• Outsourced power supply to protect against mechanical and electromagnetic interference
• A transparent, hinged plexiglass dust cover is included
• Pro-Ject 8.6 tonearm

Straight 8.6-inch tonearm

• Supplied with assembled and adjusted Ortofon OM 5E MM cartridge
• Counterweight for cartridges from 4.5 to 6g weight included
• The headshell and the tonearm tube are made of one piece of aluminum
• The tonearm tube can be twisted after loosening a screw. This allows horizontal (azimuth) adjustment of the pickup despite the fixed headshell
• Four hardened stainless steel tips mounted in sapphire form the inverted tonearm bearings
• An RCA/ RCA jack terminal allows the connection of individual phono cables

Connection

• Optionally at the high level input, MM phono input or at the USB interface on the computer
• Simultaneous analog and digital connection also possible

Dimensions

• Dimensions W x H x D: 415 x 118 x 320mm, 415 x 365 x 405mm (hood open)