Lead It C - Headshell copper cable - Pro-Ject

What is a headshell and what role does it play on a turntable?

The headshell is the connecting element between the tonearm and the cartridge. It slots or screws onto the end of the tonearm tube and holds the cartridge (the stylus-pickup unit) in place. The four delicate signal wires of the cartridge are routed through the headshell to the internal wiring of the tonearm. But a headshell is far more than a simple bracket: its mass, material and resonance characteristics directly influence the dynamic behaviour of the cartridge system — and therefore the sound ultimately retrieved from the groove.

Which mounting system fits my turntable — and how do I identify it?

By far the most widespread standard is the SME bayonet (also called the "universal headshell connector"): an oval socket with a twist-lock mechanism found on the majority of Japanese and European tonearms — including Technics, Audio-Technica, Ortofon, Jelco and many others. Beyond this, manufacturer-specific connectors exist, such as the Linn system or fixed tonearms with no removable headshell at all. Before purchasing, always check your turntable's manual or consult your dealer — an incompatible connection cannot simply be adapted.

What sonic difference does headshell material make — aluminium, magnesium or carbon?

The material largely determines how the headshell responds to resonances generated by the cartridge and the record itself. Aluminium is the classic choice: affordable, well-damped and forgiving in combination with most cartridges. Magnesium is simultaneously lighter and stiffer — its high specific rigidity shifts unwanted self-resonances into non-critical frequency ranges, resulting in a more precise, more detailed sound. Carbon fibre offers the best stiffness-to-weight ratio of all, damps internal vibrations effectively and is particularly prized in high-end systems. As a rule of thumb: the more capable the cartridge, the more worthwhile it is to invest in a magnesium or carbon headshell — only then can the cartridge fully realise its potential.

How important is headshell weight, and how does it affect tonearm setup?

Headshell weight is a central parameter in system alignment. Together with the compliance (flexibility) of the cartridge, the effective mass of the tonearm — to which the headshell contributes significantly — determines the resonance frequency of the entire system. Ideally this should fall between 8 and 12 Hz: too low and the tonearm becomes prone to motor rumble resonances; too high and the system struggles with warped records and low-frequency disturbances. Headshells are therefore available in different weight classes, typically between 7 and 15 grams. Many manufacturers supply additional weights with their headshells to fine-tune effective mass — a valuable tool when running cartridges with very high or very low compliance.

Can any cartridge be mounted on any headshell?

Broadly speaking, yes — provided the cartridge uses the standard half-inch (½") mounting spacing that virtually all common MM and MC cartridges follow. The headshell's mounting holes are designed for this standard. What varies is the range of longitudinal adjustment available: make sure your headshell offers sufficient scope to set the correct overhang for your tonearm length and preferred distortion-minimisation geometry (Baerwald, Stevenson or Löfgren). Some manufacturers offer headshells with slotted rather than fixed mounting holes — these provide considerably more flexibility during initial setup and make alignment noticeably easier.

How do I mount a cartridge correctly on a headshell — what should I watch out for?

The process requires care but no specialist tools. First, attach the four colour-coded clips (headshell leads) to the cartridge pins — red right (+), green right (−), white left (+), blue left (−). Then fix the cartridge to the headshell with the supplied miniature screws and nuts, without yet finalising the overhang or azimuth. Once inserted into the tonearm, use an alignment protractor to set the correct overhang, check the azimuth (cartridge perpendicular to the record surface), verify the offset angle, and finally set the tracking force and anti-skating compensation. Only once all parameters are confirmed should the mounting screws be tightened — firmly but not excessively, to avoid stressing the cartridge body.

Is a high-quality headshell worth it even with a mid-range cartridge?

Yes — and this is one of the most consistently underestimated upgrades in the analogue chain. A quality headshell made from magnesium or carbon reduces parasitic resonances that would otherwise blur detail and shrink the soundstage. Even a mid-priced cartridge can perform noticeably better in a resonance-free, precisely machined headshell than when clamped in a heavy budget aluminium shell. Conversely, an expensive MC cartridge in a poorly suited headshell will never reach its capabilities. The headshell is not an afterthought — it is a fully active link in the signal chain, and one of the most cost-effective improvements available in analogue playback.

From selection and care to demonstration: our services accompany your music every step of the way.

As a Klangheimat customer you benefit twice: from our automatic loyalty discount and a welcome voucher for our newsletter.