Carbon Fibre Brushes

Millions of fine conductive carbon fibres penetrate the groove and simultaneously dissipate electrostatic charge. The classic for daily use before every play.

Velvet & Suede Brushes

Made from microfibre velvet; particularly gentle on delicate, older pressings. Ideal in combination with mild cleaning fluids for wet cleaning.

Adhesive / Silicone Rollers

Their tacky surface lifts even the finest dust that fibre brushes leave behind. Washable many times over, extremely durable – perfect for listening rooms with pets.

Stylus Cleaners & Gel

Without a clean stylus, the best record care is wasted. Gel pads lift dust off the tip contact-free; liquid cleaners address sticky residue.

Cleaning Fluids

Distilled, low-alcohol or enzymatic – depending on soiling and record age. Dissolves release-agent residue on new pressings and stubborn grime on used LPs.

Supporting Care Accessories

Antistatic cloths, tear-resistant HDPE inner sleeves, finger guards, storage boxes – small helpers with a major impact on longevity.

Do I really need a record brush, or is careful blowing enough?

Blowing removes loose surface particles, but often pushes finer dust deeper into the groove and adds moisture to the record. A carbon fibre brush mechanically lifts dust out of the groove, simultaneously dissipates electrostatic charge and prevents fresh dust from being re-attracted. For consistently clean sound and reduced stylus wear, a high-quality brush is therefore the foundation of any analogue care routine.

Carbon fibre or velvet – which brush is better for my collection?

Both types have different strengths. Carbon fibre brushes penetrate deep into the groove, dissipate static charge and are ideal for regular dry cleaning before every play. Velvet or suede brushes act more gently on the surface and develop their strength in combination with cleaning fluids for wet cleaning of older or more heavily soiled records. In practice the two types complement each other – the carbon brush for everyday use, the velvet brush for care sessions.

How do I use a record brush correctly?

Place the record on the spinning platter and set the brush onto the groove with light, even pressure. Hold the brush for about two to three full rotations in one position so that dust is picked up, then slowly lift it off toward the outer edge. Never drop it abruptly or clean against the direction of rotation. After use, clean the fibres with the protective slider or a soft surface to remove collected dust.

What is a record roller and what advantages does it offer over a brush?

A record roller – also called silicone or adhesive roller – has a tacky surface made of special silicone or elastomer that picks up even the finest dust particles that fibre brushes can leave behind in the groove. The roller is rolled over the record without pressure; residues are simply washed off under running water. It does not replace a brush but complements it excellently – especially in households with pets, candles or carpet flooring, where a lot of fine dust accumulates.

Can brushes and rollers rescue heavily soiled second-hand records?

Only to a limited extent. Dry cleaning with brush and roller removes dust and loose particles – for stubborn dirt, grease, nicotine deposits or release-agent residue (typical on new pressings), a wet cleaning with a suitable cleaning fluid and velvet brush or ideally a record cleaning machine is required. After deep cleaning, the brush and roller take over everyday care and keep the result stable long-term.

How often should I care for the stylus and turntable?

The stylus should ideally be cleaned briefly before each listening session – a gel pad is enough. With intensive use or after playing a dusty record, cleaning with a suitable liquid cleaner is advisable. A dirty stylus increases distortion, reduces resolution and accelerates groove wear. Records themselves benefit from a brush cleaning before every play; a full wet cleaning is recommended when first acquiring used or new records.

Is an antistatic gun or carbon brush clamp worthwhile as an addition?

Antistatic guns – for instance with a piezo element – work contact-free and complement a mechanical brush where residual charge remains on the record surface even after brushing. For climatically dry listening rooms or setups with sensitive pressings, they are a worthwhile investment. For normal use, a high-quality carbon fibre brush is usually sufficient.

Can I use the same brush for every record – or does it carry dirt across?

A well-maintained brush does not carry dirt onto the next record – the key is regular cleaning of the brush fibres. After each use, particles collected should be removed with the cleaning slider, a protective holder or by carefully stripping. Velvet brushes can occasionally be rinsed with distilled water during wet application. Adhesive rollers are fully washable under running water and regain their adhesion in the process.

Which care set do you recommend for beginners?

For a meaningful start, three components are sufficient: a carbon fibre brush for daily dry cleaning, a silicone adhesive roller for stubborn fine dust and a gel stylus cleaner for stylus care. These three tools already cover over 90 % of regular care needs and remain a solid foundation long-term. If you additionally collect second-hand records, you should add a cleaning fluid and a velvet brush for wet cleaning.

Why buy vinyl care accessories at Klangheimat?

At Klangheimat you'll find a carefully curated range – no anonymous mass-market goods, but care accessories that have proven themselves over years in the practice of vinyl enthusiasts. We advise personally, insist on durable materials and carry both affordable entry-level solutions and high-end reference products. Our standard: every item in this category should measurably improve the sound of your collection – and preserve your records for decades.

Become a member. Benefit with every purchase.