Record care · Anti-static
Crackling during playback, dust that seems to leap onto the record, an inner sleeve that clings to the vinyl: static charge is one of the most persistent nuisances in record playback. It is caused by friction – when the record is pulled from its sleeve, when it is brushed and by the stylus itself – and draws dust particles into the groove almost like a magnet. The HumminGuru Orbit removes this charge without you having to touch the record or wave an anti-static gun over it by hand.
The Orbit is simply placed on the platter spindle. At the press of a button, its arm automatically circles the entire record surface ten times, emitting positive and negative ions simultaneously from two plasma ionisers, which a high-speed fan blows evenly onto the vinyl. It then stops by itself – the record is discharged and ready to play.
Hands-free
Sits on the platter spindle and treats the record fully automatically in 10 rotations
Bipolar
Emits positive and negative ions simultaneously – over 50 million of each polarity per cm³
Cordless
Built-in 6,000 mAh battery, charged via USB-C
Conventional anti-static guns produce the two polarities one after the other, when the trigger is squeezed and when it is released. How evenly the record is discharged depends heavily on distance, angle and the user’s patience. The Orbit solves this problem by design: two plasma outputs generate both types of ion at the same time, and a fast fan carries them straight onto the surface. Positive and negative charges on the record neutralise each other without a new charge building up in the opposite direction.
The decisive advantage lies in the rotating design. The arm circles the record at a constant distance of 23 mm and covers every area evenly – from the run-out to the outermost lead-in groove. After ten rotations the device switches off automatically. Lift the Orbit off the spindle, lower the stylus and enjoy quieter playback with less crackling and popping.
To operate, the Orbit needs a clear circle of at least 326 mm in diameter around the platter spindle – tonearm, dust cover and controls must not be in the way. Without an adapter, the spindle including the record on it may protrude no more than 11 mm. For longer spindles, two anti-static spindle adapters are included, allowing the Orbit to fit spindle heights of up to 23 mm. Singles and 10-inch records are covered too, as the arm sweeps the entire area of a 12-inch LP.
At 625 g, the Orbit is no lightweight. On turntables with a softly sprung sub-chassis, check that the suspension can comfortably take the extra weight during treatment. Record weights or clamps must be removed beforehand, as the Orbit itself sits on the spindle.
Important for the right expectations: the Orbit removes static charge, but not stubborn dirt, grease or fingerprints. The ideal care routine therefore combines thorough cleaning – for example with an ultrasonic record cleaning machine – with the Orbit immediately before playing. How strong the charge is also depends on humidity, temperature, record material and platter mat; the Orbit shows its strength particularly in dry, heated winter air.
To keep the ionisers working effectively, clean the fan and ion needles occasionally with the small brush supplied – always with the unit switched off. The built-in battery charges via USB-C cable in about four to five hours. In the box you will find the Orbit, the cleaning brush, the USB-C charging cable, two spindle adapters and the user manual.
HumminGuru is a brand of Happy Well International Enterprise Ltd. from Hong Kong, which became known for its compact ultrasonic record cleaning machines. The Orbit adds the final step before listening to this range: discharging the freshly cleaned record or the one just pulled from its sleeve.
Frequently asked questions
What does the HumminGuru Orbit do?
The HumminGuru Orbit discharges records before playback. It sits on the platter spindle, automatically circles the record ten times and neutralises the static charge with positive and negative ions emitted simultaneously.
Does the Orbit also clean my records?
No. The Orbit removes static charge only. Remove stubborn dirt, grease and fingerprints with a record cleaning machine or wet cleaning; the Orbit is then used immediately before playback.
Will the Orbit fit my turntable?
The Orbit needs a clear rotation circle of 326 mm in diameter around the spindle. Without an adapter, the spindle including the record may be no more than 11 mm high; with the two spindle adapters supplied, up to 23 mm.
How does the Orbit differ from an anti-static gun such as the Zerostat?
An anti-static gun produces positive and negative ions one after the other and is moved over the record by hand. The Orbit emits both polarities simultaneously and treats the entire record surface automatically at a constant distance.
Does the Orbit also work with singles and 10-inch records?
Yes. The Orbit’s arm sweeps the area of a 12-inch LP and therefore also covers smaller formats such as 7- and 10-inch records.
How long does the battery last?
The built-in battery has a capacity of 6,000 mAh and fully charges via USB-C in about four to five hours. One treatment takes only ten rotations, so a single charge lasts for a great many record sides.
| Manufacturer |
HumminGuru (Happy Well International Enterprise Ltd., Hong Kong) |
| Model |
Orbit HG03 |
| Device type |
Anti-static ioniser for records |
| Method |
Bipolar ionisation, 2 plasma ionisers with a fast fan |
| Ion output |
Over 50 million positive and negative ions per cm³, simultaneously |
| Working distance to record |
23 mm |
| Treatment |
Automatic, 10 rotations with auto shut-off |
| Required rotation circle |
Min. 326 mm diameter |
| Spindle height (incl. record) |
Max. 11 mm, up to 23 mm with spindle adapters |
| Record formats |
7, 10 and 12 inch |
| Battery |
Lithium-ion, 6,000 mAh |
| Charging time |
Approx. 4–5 hours |
| Power supply |
USB-C, 5 V / 1.8 A |
| Power consumption |
Max. 4.5 W |
| Dimensions |
270 × 92 × 104 mm |
| Weight |
625 g |
| Material |
ABS |
| Contents |
Orbit, cleaning brush, USB-C charging cable, 2 spindle adapters, user manual |
| EAN |
4893351901005 |